Solar Design Engineering Services | Solar Power Plant Design

Gensol has an experience of over 1470+ MW Solar PV Design Engineering. This service covers basic engineering for the purpose of establishing conceptual design to ensure that the planned technical approach will meet the requirements. Based on the concepts, whole detailed engineering is performed in order to ensure that the design implementation has met all the requirements for the installation.

Solar Electrical DC (Pre Inverter)

PROJECT LAYOUT

Shadow losses can be significant depending on distance between modules
Location of inverters can significantly control costs and losing cables

STRING COMBINER BOX

Inappropriate fuse rating poses risk to the modules and inverters
Enough redundancy ensures higher equipment uptime
IP protection is essential to withstand the vagaries of nature
Busbar sizing is critical to the safety of the equipment

CABLE SIZING

Increases cost and losses if inappropriately sized
UV protection and conduiting to prevent degradation because of exposure

SCADA SYSTEM

Monitoring at micro level ensures the accurate energy generation measurement and detection & retification of faults in minimum time.

Solar Electrical AC (Post Inverter)

Transformer Rating

Can lead to loss in energy generation in case it is not sized optimally
Enough redundancy ensures higher equipment uptime

LT AND HT PANELS

Appropriate relays ensure the maximum protection of the plant and detection of faults
CT /PT Ratios need to follow the approved grid requirements

CONDUCTOR SIZING

Increases costs and losses in case of inappropriate sizing
Appropriate protection in accordance with design fault current

Civil & Structural Drawings

LAND DEVELOPMENT

Should be in accordance to the Topographic survey to minimize cutting/ filling and nevertheless provide similar heights for structures in a row

MODULE MOUNTING STRUCTURE

Should have correct clearance from the ground
Should be designed according to the wind and seismic zone of the site

COMMON FACILITIES

Access roads should be provided in accordance to the shape of the land to ensure access to the whole plant particularly for heavy vehicles
Drainage should be designed as per the rain pattern of the location and have slope according to the final drain outlet of the plant

INVERTER & CONTROL ROOM

Provision of natural/ forced ventilation

Case Study - 1 MWp solar PV project at Sultanate of Oman for third par...

Read how Gensol provided Engineering Consultancy Servic...

Case Study - 1 MW Solar Project at Yemen Governorate for Estidama Ener...

Read about Gensol's work at Yemen for Estidama Energy

Case Study - 800 MWp for Greenko in Kurnool, Andhra Pradesh, India

Gensol helped Greenko Group bring India’s largest sol...